What Does a Read-Only SD Card Mean?
SD Card Write Protected is another name for read-only failures on SD cards. Despite the name, it can only read words; it cannot change characters. On Android, this error can happen occasionally. Sometimes it suddenly changes to reading only. As a result, nothing can be added to, written to, or deleted from the SD card.
The following four primary causes of the error “SD Card Read Only.”
1. Occasionally, we lock the SD card, enabling write protection.
2. The SD card’s Physical Write protection tab
3. On account of the software or application, the SD card displays the error “SD card read-only.”
4. On the SD card, there can be corrupted files.
How to Fix an SD Card Read-Only Error?
Sometimes a seemingly significant issue can be fixed in seconds, but sadly, you don’t know the answer. The “SD Card Read Only Error” also offers some of the most significant fixes. Any number of factors could be at blame for this specific mistake. The most typical one has previously been mentioned. Additionally, the answer is the same. As a result, we have provided some trustworthy methods to address the “SD Card Read Only Problem.”
Fix 1: Unlock the Write Protection Lock.
The SD card has a tiny switch on it. There may be a physical write protection tab when you remove the SD card from a smartphone or a Nintendo Switch. No, there are instructions on the SD card that specify whether or not to lock the card. The actions you must follow to remove the physical write protection are listed below.
1. remove the SD card from which the “Read-only” error remains.
2. Check whether the SD card’s physical lock is turned on.
3. Position the switch from on to off if it is.
4. The lock will then be back on its open side in this manner.
Fix 2: Removing the SD Card Read-Only Error Using CMD
Use CMD to fix the “SD Card read only error” by doing the procedures listed below:
1. Install Windows first, then insert the SD card.
2. To open the search result, click the Start button, type CMD, and click the link.
3. Type diskpart into the CMD search box right now.
Write the list volume after that.
4. all of the discs on the windows will begin to appear. Currently, locate the SD Card Disk.
5. after that, key in “select volume.” Enter your memory card drive’s letter in place of the # sign.
6. Do this by typing disc evident read-only characteristics.
7. The write protection will then be taken away.
Fix 3: Remove SD Card Read Only with Diskpart
Diskpart may occasionally have the SD Card configured to read only. But if you take these steps, you can make it read Normal instead of Only.
1. open the search window and type “diskpart” before running it as an administrator.
2, Once it has started, input the following command lines after typing them.
3. “list disk select disc n,” where “n” stands for the read-only memory card’s disc number. Apparent read-only properties on the disc.”
Then disconnect the memory card, close the disk part, and reconnect again.
Fix 4: Check Disk Tool to Disable SD Card Read Only Mode
You can run the check disc tool on the SD card once more if the file system corruption is the only source of the SD card’s corruption. The steps are as follows:
1. Start File Explorer
2. Locate the SD Card’s drive and then right-click on it.
3. After that, pick properties from the menu.
4. Next, select “Check now.”
Fix 5 Format your SD Card
The SD card needs to be formatted if none of the above fixes successfully fix the problem. Specific faulty or malicious files harm the memory card, so the SD card only reads an error message. Additionally, there are additional factors, such as hardware, etc. Therefore, it stands to reason that you will be concerned about the data that will be deleted, but we also have a better answer for it. However, let’s first talk about how to format the SD card.
1. Open File Explorer.
2. Right-click the SD card disc
3. choose the format from the pop-up menu.
4. double-check the information and select the format.
Bonus Tips: How to Recover Data from a Formatted SD Card?
The first thing that springs to mind when we format an SD card is that we have lost all our data. However, some easy techniques exist to retrieve your data despite the formatted SD card. You can quickly and easily recover your data with a few clicks. As a result, both your data and the read-only SD card error will be restored. The 4DDiG now comes to the aid of the data recovery process. One of the most excellent recovery programs with some of the best features is Tenorshare 4DDiG. The fact that it runs on both Windows and macOS is remarkable. Therefore, you can download the Tenorshare 4DDiG and recover whatever you need to recover data SD Card Shows Read-Only See How to Fix It.
